Farr Gp 42 gebraucht

The GP42 was the attempt of International Sailing Federation and ORC to promote a new “box rule” for fast, pure racing boats in the TP52 style but smaller in dimensions and with more affordable budget. Steering Tiller
DESIGN
Builder: Latini Marine
Designer: Farr Yacht Design
Design notes: This GP42, originally built in 2006 as Roma, was the first ever built by Farr Design and Latini Boatyard in Rome. In 2017, she was significantly updated to more modern specifications. The owner, with the support and guidance of Maurizio Cossutti, modified mast to allow the use of a square top main, and added a long carbon bowsprit to fit big masthead gennakers, instead of the original spinnakers on pole. Finally, there was a complete revision of weights distribution, moving ballast from bilge to keel to increase stability and therefore power, a reshaped keel fin to help upwind performances and an optimized sail-plan made this boat highly competitive again.

ACCOMMODATIONS
Shower: No
Accommodations notes: As per ORC 42 Rule - Structural carbon.

GALLEY
Galley notes: Aluminum, 3 ring burner – custom. Galley sink: Carbon - custom.

NAVIGATION INSTRUMENTS
Electronics: B&G Electronic Instruments. Hydra 4000.
GPS: YES
VHF: YES
Navigation instruments notes: H 3000 system Depth sounder Log-speedometer Wind-speed direction 2 – FFD Bulkhead Displays. 4 – 20/20 Mast Displays. All electronic equipment is calibrated. New wind sensor

ELECTRICAL
Batteries: 2 batteries x 75 Ah = 450Ah. 1 Engine battery x 75Ah.
Electrical notes: Electrical panel: Custom 18 switches.

SPARS & RIGGING
Sails: RACING SAILS – SEE THE TABLES MAIN SAILS 3 SQUARE TOP + 2 STANDARD (all in carbon) HEAD SAILS 9 JIBS (carbon) 1 STAYSAIL ASYMETRIC SPINNAKERS 15 SPINNAKERS 1 CODE CERO
Rigging: Rod Navtec
Mast: Hall Spars Carbon
Boom: Carbon
Vang: Yes
Spinnaker pole: Bowsprit
Tuff Luff: Harken Foil
Running rigging: Dyneema
Spars and rigging notes: Hall Spars - rule optimized carbon section with taper. 2 sets of carbon fiber spreaders. Carbon fiber boom. Spinlock - jammers & organizer Standing rigging Navtec Series 800, L 834 tip cup, C 890 turnbuckles Mast jack 2 bricks, 2 external hydraulic cylinders and a pump-set with gauge Backstay Composite Headsail foil Harken Carbo RUNNING RIGGING: 6 - Halyards with Tylaska T-8 shackles, tapered. 1 - reefline: 10 mm. 2 - genoa sheets: 10 mm with Equiplite shackles. German type mainsheet system 1 - mainsheet: 10 mm to suit German type mainsheet system. 2 - spinnaker sheets, 8 mm with Tylaska T-8 shackles, tapered. 2 - spinnaker afterguys, 10 mm, tapered. 1 - tackline including T-12 Large Bail shackle. STANDING RIGGING: Navtec SERIES 800, L 834 tip cup, C 890 turnbuckles. Mast Jack - (2) bricks, (2) external hydraulic cylinders and a pump-set with gauge. Composite Backstay. Harken Carbo headsail Foil.

DECK EQUIPMENT
Deck hardware: Harken
Winches: Harken Grand-Prix winch package.2 - 50STRQ Halyard winches.2 - 55TCR-Wide Body 3 Speed Pedestal-driven Primary winches.2 - 50.2STR Mainsheet winches.2 - 50.2STR Backstay winches.Carbon composite belt-drive pedestal grinder.Assorted winch handl
Deck equipment notesHarken Grand-Prix winch package 2 - 50STRQ halyard winches 2 - 55TCR Wide Body 2 - 50.2STR mainsheet winches 2 - 50.2STR backstay winches Carbon composite belt-drive pedestal grinder Assorted winch handles.

SAFETY EQUIPMENT
Fire-extinguishers: YES
Safety equipment notes: First-aid Kit. Lifejackets. Pyrotechnics. Life lines 2.

CONSTRUCTION
Keel: Weldox fin, lead bulb.
Construction notes: Steering: Tiller. Deck color: Silver Grey. Hull Male mould: CNC Cut frames - Mahogany Cold moulded and Fibre reinforced laminate. Hull Female Plug: glass fibres injected with epoxy resin, laminated on the male plug. Deck Male Mould: CNC Cut frames - Mahogany Cold moulded and plywood with reinforced laminate. Deck Female Plug: glass fibres injected with epoxy resin, laminated on the male plug. Construction materials: SP SYSTEM Carbon Fibres and Corecell/Airex foams. SP SYSTEM Epoxy resins with Pre-preg or Wet Systems.

EXTRA
Shipping Cradle with keel cradle Toolbox. Engine serviced and new belts. Interior cushions. New pedestal grinder buttons. 2 jib sheet old with Tylaska. 4 Spinnaker Blocks. Spinnaker sheet 1. 2 Spinnaker Bob-stays. Batten ends for the main & 2 jibs. Harken handles.

FINAL NOTES
Final notesDesign n.: 605

All information is provided to the best of our knowledge and belief in good faith, represents our subjective point of view and is not relevant to the contract.
Mehr Anzeigen